How to maintain the glass reactor? How to maintain the glass reactor?
Glass reactor in the use process will produce a certain amount of dirt and wear problems, for the normal use of users will be affected. So the user needs daily maintenance in the process of using the product, and can effectively prolong the life of the instrument. The following small braid on the specific introduction of glass reactor maintenance points, I hope to help everyone. Maintenance points of glass reactor 1. Careful inspection of the instrument before use, whether the glass bottle is damaged, whether the interface is consistent, pay attention to light handle. 2, wipe the interface with soft cloth (usable napkin) instead, then apply a little vacuum grease. After the vacuum grease is used, it must be covered to prevent sand from entering. 3. The joints of glass reactor should not be tightened too tightly, and should be loosened regularly to avoid long-term locking leading to the bite of connectors. 4. Turn on the power switch first, then let the machine run from slow to fast. When the machine stops, keep the machine in a stop state, then turn off the switch. 5, the PTFE switch can not be screwed up too much, and it will easily damage the glass. 6. After each use, all kinds of oil stains, stains and solvents left on the surface of the machine must be wiped off with soft cloth to keep clean. 7, after the shutdown, loosening the Teflon switches, the long-term stationary state will cause the PTFE piston to deform. 8. Clean the sealing ring regularly by removing the sealing ring, checking whether there is dirt on the shaft, wiping it clean with soft cloth, then applying a little vacuum grease, and reloading it to keep the shaft and sealing ring smooth. 9, the electrical parts must not be allowed to enter the water. 10. It is necessary to purchase the original authentic accessories, and the random use of other accessories will cause fatal damage to the machine. 11, when making any repairs or inspections to the glass reactor, we must first cut off the power supply and water source.